The hulls and frames of the Elizabeth Swann are to be made as 10 main subassemblies, (with the port and starboard outriggers/sponsons being mirror image - and the fore and aft foils being identical), as depicted below and joined by assembly to form the 'articulation-ready' wave piercing trimaran hull. These are draft dimensions, for project planning purposes, subject to revision by our naval architects and stressing team as the concept is developed. The vessel is designed first and foremost as a development test-bed for ocean speed trials, and secondly as a stunning solar boat for inclusion in a potential series of conservation themed films.

		HELM & F'WARD CABINS PLAN
PORT				STARBOARD
		CENTRAL SPACEFRAME PLAN
PORT OUTRIGGER			STARBOARD OUTRIGGER
		AFT CABINS & GALLEY PLAN

Click on the sections to see details/dimensions

Click on the sections to see details/dimensions

Click on drawing above to return to the main specification page

SOLAR WINGS - The moveable solar-panel wing assemblies are subject of separate drawings and sub-assemblies.

WIND TURBINES - The wind turbine mast and mounting frame sub-assemblies are the subject of separate drawings and sub-assemblies.

DRAFT SPECIFICATIONS

Material: 5083 marine alloy (substantially)

Hull length: 44 meters (nominal)
Hull width: 16.6 meters, to sponson outers
Central hull diameter: 2.46m (for wave piercing hull) subject to tank tests

[LEFT] The current Atlantic record holder, 'MS Tûranor Planet Solar' achieved 5.3 knots in 2012 [RIGHT] Elizabeth Swann Atlantic record contender aiming for 7.5 - 10 knots.